[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

RE: Rotor Tracking win Wisp



Just to close the loop on this, in case anyone has a similar problem. I had
to fill in the settings->Rotor->Step value in WinDDE Client, that was the
magic param. Antennas now track the sats wonderfully.

Thanks to Howard and Fernando for little r-ing and helping me out.

73's

Robin W7YED
Amsat #35656
 
-----Original Message-----
From: owner-AMSAT-BB@amsat.org [mailto:owner-AMSAT-BB@amsat.org] On Behalf
Of Robin Alexander
Sent: Thursday, February 03, 2005 11:45 PM
To: AMSAT-BB@amsat.org
Subject: [amsat-bb] Rotor Tracking win Wisp

Hi,

I just build the G6LVB interface for the G5500. I am using WispDDE 4.1
client and Satscape. My problem is that Wisp does not seem to autoupdate the
rotor automatically. Satscape sends the data to Wisp just fine and the auto
update for doppler works great. However I have to manually click the "update
rotor" button to send the info to the controller. I do have autoupdate
checked, but it doesn't seem to want to. What am I doing wrong?

Thanks

Robin W7YED
Amsat #35656
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home