Re: [amsat-bb] IC-910H

[Emily Clarke <w0eec@xxxxxxxxx>]

Same here.  Can't say enough positive about it other than the 7417 driver 
died on me.  So rather than just replace the chip I added a socket to the 
board so it could be easily replaced.  Hasn't happened again since (of 
course - if it's easy to replace it won't fail.)

73,

Emily



At 10:52 PM 1/20/2005 -0600, you wrote:
>I use a 910H with Sat-PC32, not Nova, and like it very much.  I built the 
>C-IV interface myself using a board available from FAR Circuits.
>
>Auto-doppler correction is wonderful!
>
>George, KA3HSW
>
>
>
>----- Original Message ----- From: <sco@sco-inc.com>
>To: <amsat-bb@amsat.org>
>Sent: Thursday, January 20, 2005 8:32 AM
>Subject: [amsat-bb] IC-910H
>
>
>>Does anyone use the Icom 910 with satellites and Nova and auto doppler 
>>control software?
>>
>>Do you like this combination?
>>
>>Les
>>----
>>Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
>>Not an AMSAT member? Join now to support the amateur satellite program!
>>To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
>----
>Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
>Not an AMSAT member? Join now to support the amateur satellite program!
>To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



---------------------------------
W0EEC - CM87tm
AMSAT Area Coordinator - San Francisco Bay Area
http://www.projectoscar.net    http://www.PlanetEmily.com

Join AMSAT!  http://www.amsat.org
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org