[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Icom 910H CAT problem



Hi Brian,

The design is in the ARRL Handbook (I have the 2001 edition - not sure if 
it is in all of them.)  It was also printed in QST in Feb 93.

The PC board is available at FAR Circuits:
http://www.farcircuits.net/arrl.htm

Look under Chp 22.45

73,

Emily


At 09:44 PM 12/2/2004 +0100, OZ1SKY Brian wrote:
>----- Original Message ----- From: "Emily Clarke" <w0eec@amsat.org>
>To: "Jeff Griffin" <kb2m@comcast.net>
>Cc: "AMSAT BBS" <amsat-bb@amsat.org>
>Sent: Thursday, December 02, 2004 5:52 PM
>Subject: Re: [amsat-bb] Icom 910H CAT problem
>
>
>Hi Emily
>
>>You didn't mention whether or not you have the ICOM CV-17 or if you built 
>>your own.  I built my own, and found that after a year the 7417 level 
>>converter died.  After it died, rather than soldering in a new 7417 I 
>>installed a 14 pin DIP socket "just in case".
>
>Do you have a link for a homemade CV-17?
>
>
>>73,
>>
>>Emily
>
>Regards
>Brian OZ1SKY ----
>Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
>Not an AMSAT member? Join now to support the amateur satellite program!
>To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



---------------------------------
W0EEC - CM87tm
AMSAT Area Coordinator - San Francisco Bay Area
http://www.projectoscar.net    http://www.PlanetEmily.com

Join AMSAT!  http://www.amsat.org
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home