[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Preamp Power Injector



Thanks all for the advice.

I will just breakdown and by the SSB Electronics Sequencer, rather than run
the risk of transmitting into the preamp.

73's,
Joe Westbrook, K7ZT

----- Original Message -----
From: "snyder54" <snyder54@cox.net>
To: "Joe Westbrook" <k7zt@cox-internet.com>
Cc: "Amsat-bb" <amsat-bb@AMSAT.Org>
Sent: Friday, September 17, 2004 8:06 PM
Subject: Re: [amsat-bb] Preamp Power Injector


> Joe
>    I bought one from SSB electronics awhile back for $50.00 & has
> N-connectors, works great.
>
> 73 Bruce KG4YEV
>
> ----- Original Message -----
> From: "Joe Westbrook" <k7zt@cox-internet.com>
> To: "K & R Yoksh" <yokshs@planetkc.com>; "Westbrook, Joe"
> <Joe.Westbrook@broadwing.com>; "amsat-bb" <amsat-bb@AMSAT.Org>
> Sent: Friday, September 17, 2004 7:47 PM
> Subject: Re: [amsat-bb] Preamp Power Injector
>
>
> > Kyle:
> > Thanks, I will be using this on a FT-726R, is there anything that I
> > should be aware of when transmitting?
> >
> > BTW:
> > The preamp is an Icom AG1
> >
> > Regards,
> > - Joe, K7ZT
> >
> > ----- Original Message -----
> > From: "K & R Yoksh" <yokshs@planetkc.com>
> > To: "Westbrook, Joe" <Joe.Westbrook@broadwing.com>; "amsat-bb"
> > <amsat-bb@AMSAT.Org>
> > Sent: Friday, September 17, 2004 5:56 PM
> > Subject: Re: [amsat-bb] Preamp Power Injector
> >
> >
> > > ----- Original Message -----
> > > From: "Westbrook, Joe" To: <amsat-bb@AMSAT.Org>
> > > Sent: Friday, September 17, 2004 12:39 PM
> > > Subject: [amsat-bb] Preamp Power Injector
> > >
> > >
> > > > I recently purchased a preamp for 432Mhz that
> > > > requires power injection via the coax.
> > > > I would like to construct a power injector, Does anyone have a
> schematic
> > > diagram handy that I could
> > > > use, or know of a source for one of these?
> > > >
> > > > Thanks and &73's DE
> > > > K7ZT, Joe Westbrook
> > >
> > > Hi Joe,
> > >
> > > I've built a couple of these.. Seem to work well. I built mine into a
> > common
> > > cable-TV splitter.
> > >
> > > http://homepages.ihug.co.nz/~jpsl/powering_remote_units1.htm
> > >
> > > 73 and good luck,
> > >
> > > Kyle Yoksh
> > > K0KN
> > > Olathe, Kansas
> > > Amsat# 35249
> > > ----
> > > Sent via amsat-bb@amsat.org. Opinions expressed are those of the
author.
> > > Not an AMSAT member? Join now to support the amateur satellite
program!
> > > To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
> > ----
> > Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> > Not an AMSAT member? Join now to support the amateur satellite program!
> > To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
> ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT member? Join now to support the amateur satellite program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home