Re: [amsat-bb] Preamp Power Injector

["Joe Westbrook" <k7zt@xxxxxxxxxxxxxxxx>]

Kyle:
Thanks, I will be using this on a FT-726R, is there anything that I
should be aware of when transmitting?

BTW:
The preamp is an Icom AG1

Regards,
- Joe, K7ZT

----- Original Message -----
From: "K & R Yoksh" <yokshs@planetkc.com>
To: "Westbrook, Joe" <Joe.Westbrook@broadwing.com>; "amsat-bb"
<amsat-bb@AMSAT.Org>
Sent: Friday, September 17, 2004 5:56 PM
Subject: Re: [amsat-bb] Preamp Power Injector


> ----- Original Message -----
> From: "Westbrook, Joe" To: <amsat-bb@AMSAT.Org>
> Sent: Friday, September 17, 2004 12:39 PM
> Subject: [amsat-bb] Preamp Power Injector
>
>
> > I recently purchased a preamp for 432Mhz that
> > requires power injection via the coax.
> > I would like to construct a power injector, Does anyone have a schematic
> diagram handy that I could
> > use, or know of a source for one of these?
> >
> > Thanks and &73's DE
> > K7ZT, Joe Westbrook
>
> Hi Joe,
>
> I've built a couple of these.. Seem to work well. I built mine into a
common
> cable-TV splitter.
>
> http://homepages.ihug.co.nz/~jpsl/powering_remote_units1.htm
>
> 73 and good luck,
>
> Kyle Yoksh
> K0KN
> Olathe, Kansas
> Amsat# 35249
> ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT member? Join now to support the amateur satellite program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org