[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: setting tone on Yaesu FT847 in Sat mode



Move the satellite TX to the main VFO (left) using the TX button when in
satellite mode and go into the menu and set the tone - exit menus then press
the tone button until you see "Enc" - then you can move the TX back to the
right side using the RX button so you can tune Doppler on the RX side in the
main VFO on the left side.

73's

Don Woodward
KD4APP
AMSAT 33535
http://kd4app.webhop.org

----- Original Message ----- 
From: "Gopal Madhavan" <gopalmadhavan@vsnl.com>
To: "Amsat BB" <amsat-bb@AMSAT.Org>
Sent: Friday, July 30, 2004 07:16
Subject: [amsat-bb] setting tone on Yaesu FT847 in Sat mode


I am having problems in setting the 67.0 tone required for the uplink
for AO-51. It does not seem to register into the memory. Could some one
point me to what I am doing wrong? I have set the tone on a repeater
input without problem.

Thanks in advance

VU2GMN

Gopal Madhavan
"Shreyas" Apts
128(old63) Greenways Road
R A Puram
Madras(Chennai) -600 028
Tel: 91 44 2493 7724
Fax: 91 44 2493 9818
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home