[amsat-bb] WiSP

[Roy <rdwelch@xxxxxxxxxx>]

You can create a text file, MSPE TNC Startup.TXT with the commands you want in it, 
one command per line.  Put it in the satellite directory of the satellite you want to 
be associated with the commands.  These commands are send to the TNC after all of the 
others, so I am not sure if the TNC is set to KISS before the commands are sent or 
not.  If so they won't be acted upon.  You can also make a MSPE TNC Exit.TXT file to 
reset the TNC if you wish.
-- 
73, Roy -- W0SL
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org