[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Doppler



Hello Nels,
look at  the following:

1. In the auxiliary program SatSetup the CAT delay value must be at least
70.
(I assume the COM port number is right).
Store possible changes and re-start SatPC32.

2. Open the menu "Options".
The option DDE CAT must be UN-CHECKED!
Look whether the settings for model, baudrate and addresses are right.
Set the baudrate to 19200 and do the same at the radio.
The default address of the IC-910H is hex 60, so both address values in the
Options menu must be $60 if you kept that value.
Store the Options and restart SatPC32.

3. CAT must be on (C+). (You may activate the option "CAT" in the "Activate
at start..." list in the menu "Options").

Let me know, whether it works now

73s, Erich, DK1TB

----- Original Message -----
From: "Arlon Nelson" <anelson@min.midco.net>
To: "Amsat-bb" <amsat-bb@AMSAT.Org>
Sent: Sunday, July 18, 2004 1:42 AM
Subject: [amsat-bb] Doppler


> I running SATPC32 and the Icom IC-910h. I'm letting the SATPC32 control
the
> doppler on the 910H. It will work once and then the CAT will not work
after
> that. The C+ is checked and the frequencies are listed in the frequency
> boxes in the top middle.
> Any ideas??
> Thanks
>
>
>
> 73,
>
> Nels, WØTUP
> Minot, North Dakota
> anelson@min.midco.net - w0tup@arrl.net
> http://www.nels.net.tc
> Ward County - Grid Locator DN98if
> Flying Pigs 590 - QRPp-I #760 - 20/40M RockMites
> ARRL - FISTS #8610 - CC #1310 - FISTS WAS #143
> FISTS PLATINUM #365 - FISTS SILVER #367
> ARRL SSTV WAS #33 - IVCA MIXED BAND SSTV #1
> <><><><><><><><><><><><><><><><><><><><><><><><>
> We the willing.
> Led by the unknowing have done so much
> with so little for so long
> we are now qualified to do anything
> with nothing, in no time at all.
> <><><><><><><><><><><><><><><><><><><><><><><><>
> ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT member? Join now to support the amateur satellite program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home