RE: [amsat-bb] TAPR Motorola EVM56002 Radio Interface

["Robert McGwier" <rwmcgwier@xxxxxxxxxxx>]

And also the Micro908 antenna analyst.  DO NOT let the name fool you.
This is going to be a terrific thing to own and play with.

http://www.amqrp.org/kits/micro908/index.html

I will be attempting to do autotuning,  a fancy noise reduction
algorithm,  a fancy notch filter, and feedforward agc in the
kdsp10 for use in the Elecraft K2, and to do PSK-31 for it in
the Micro908.  Lyle has done a nice job with this.

Bob


-----Original Message-----
From: owner-AMSAT-BB@AMSAT.Org [mailto:owner-AMSAT-BB@AMSAT.Org]On
Behalf Of Mike Seguin
Sent: Wednesday, July 14, 2004 3:36 PM
To: Freeman P. Pascal IV; amsat-bb@AMSAT.Org
Subject: Re: [amsat-bb] TAPR Motorola EVM56002 Radio Interface


----- Original Message ----- 
From: "Freeman P. Pascal IV" <fpascal@rhinocorps.com>
Subject: [amsat-bb] TAPR Motorola EVM56002 Radio Interface


> Does anyone know of a replacement project for the TARP DSP56002EVM?  I'm
> interested in learning about DSPs and this look like a good platform to
> work with.

I'd look at Lyle, KK7P's site:

http://www.fidalgo.net/~wa7gxd/kdsp10.html

This is the DSP engine used in Bob Larkin's DSP-10 SDR (replacing the EZKit
lite) and also in the Elecraft K2.

73,
Mike, N1JEZ
AMSAT #29649
Local Area Coordinator
"A closed mouth gathers no feet."
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org