[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

RE: TX: soundcard packet -- 9600 baud



Steve,

Unlike 1200 baud, 9600 baud is very picky about the drive level.  A
deviation meter is handy, but if you have a scope, take a look at the TX
drive level.  For 9600 baud, something like 3 Vpp will give you the desired
3 KHz deviation.  That is higher than the manual says, but was blessed by
Yaesu tech support, and had worked fine for me for years.  Other
possibilities, but a necessary condition for it to work.


Alan
WA4SCA


-----------------------------------


Without courage, all other virtues lose their meaning.

Sir Winston S. Churchill
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home