[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: MixW and tlmEcho



Big time progress, Mike!

I just got a keyboard extension cable from Radio Shack and it has all 6 pins
wired through. Soldered on a 1/8 mini, plugged it into the soundcard and
presto!! I can now decode packets at 9600 baud from my Kenwood D7A(g).

Now if I can just figure out how to configure MixW for the tnc emulation
mode, I think I can install the telem decoding program on the same machine
and have the decoded packets go from MixW to TLM and I'll have it made!

73,

...hasan, N0AN
----- Original Message ----- 
From: "Mike Seguin" <n1jez@verizon.net>
To: "AMSAT BB" <amsat-bb@AMSAT.Org>
Sent: Friday, July 02, 2004 11:27 AM
Subject: [amsat-bb] MixW and tlmEcho


> Just ran the ~1607 UTC pass of ECHO here in Vermont.
>
> I used an FT-847 with the 9k6 data output feeding the sound card on my
> PIII - 700 laptop running Win2K. I was running MixW configured as a 9k6
> G3RUH mode. I installed the MixW Comm Emulation Driver and set it to
output
> MixW on COM5 and loop to COM4. I then set tlmEcho to COM 4 19,200.
>
> Worked fine! Got quite a bit of telemetry. I only downloaded MixW last
night
> and spent about a hour configuring it and playing a bit. Seem like a
pretty
> simple solution for those without a 9k6 hardware modem.
>
> I don't know about uplinking. Only copying telemetry at this point...
>
> 73,
> Mike, N1JEZ
> AMSAT #29649
> Local Area Coordinator
> "A closed mouth gathers no feet."
>
> ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT member? Join now to support the amateur satellite program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
>


----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home