[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: 2232 w/echotlm



Yes,I'm using procomm also to talk to modem,but since tlmecho can command the
modem into kiss mode,then its just a matter of inputing the correct code (into
tlmecho's initiation file) to also exit correctly. Here's the line in
cbpini.txt which needs fix. I tried replacing
tapr with pacomm,but was NG. I don't know what he means by "tapr" or "taper
equv".  If I had the source then I could fix it. Any help or
suggestions appreciate.

>; type of TNC.  'kpc' for kpc 9612, 'tapr' for tapr or pacomm or taper equiv.
>tnc = tapr

Nick A.





----- Original Message ----- 
From: "Mark" <ku7z@sisna.com>
To: "Nick Adiletto" <K1UXBMA@comcast.net>
Sent: Thursday, July 01, 2004 10:44 PM
Subject: Re: [amsat-bb] 2232 w/echotlm


> Nick, I use an old terminal program called Procomm to talk to the 2232.
>   I think Windows still ships hyper-terminal with windows and it should
> work okay.  I go to it and turn on KISS with "KISS $01" command and then
> get out of it and run echotlm.  When done there I go back to the
> terminal program and send 3 cntl-C's to get it back out of KISS, maual
> says to use the command "KISS $00"...?.  I was using tapr as the type of
> tnc.  But will try TNC-NB96.  Echotlm works great.
>
> 73, Mark, ku7z
>
>
> Nick Adiletto wrote:
>
> > Same problem here,only I'm using a TNC-NB96.  Won't come out of kiss
mode,so I
> > feed in alt>192 + alt>255.
> > Any help appreciated ,thanks.
> >
> > Nick
> > K1uxb
> >
> >
> > ----- Original Message ----- 
> > From: <N4QWF@aol.com>
> > To: <amsat-bb@AMSAT.Org>
> > Sent: Thursday, July 01, 2004 09:19 PM
> > Subject: [amsat-bb] 2232 w/echotlm
> >
> >
> >
> >>If there is anyone that has been able to get the Echotlm program to work
> >
> > with the AEA 2232 could you lend a hand. I need to know what you are
entering
> > in the CPBINI.TXT file  for "type of TNC", "y=init the TNC into kiss on
> > startup", and "y=take the TNC out of kiss when program quits, kissoff".
> >
> >>Since there is no listing of the AEA TNC and the kiss on command is just
the
> >
> > word "kiss" and the exit kiss mode is three ctrl-C commands I wonder how
you
> > would enter this.
> >
> >>Any help would be greatly appreciated. 73's << John
> >>----
> >>Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> >>Not an AMSAT member? Join now to support the amateur satellite program!
> >>To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
> >
> >
> > ----
> > Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> > Not an AMSAT member? Join now to support the amateur satellite program!
> > To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
> >
> >
>
> -- 
> 73!
> Ku7z, Mark in DN41
> "Amateur radio operators do it with frequency. Ham radio operators do it
> till their GigaHertz."
>
>
>

----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home