Re: [amsat-bb] IC-910 & TNC3 help

[Mike Kingery <mkmk518@xxxxxxxxxxxx>]

Russ,

Swap your 6 pin mini din connectors on the back of the ICOM.  The MAIN and
SUB are reversed when in Sat mode.  Good luck.

73 KE4AZN
Mike

----- Original Message ----- 
From: <rjacob@hotkey.net.au>
To: <amsat-bb@AMSAT.Org>
Sent: Tuesday, June 29, 2004 5:41 AM
Subject: [amsat-bb] IC-910 & TNC3 help


> G'day All,
>               I badly need some help setting up an IC-910 and TNC3 to run
> on UO-22, I've setup  using the main & sub data ports in sat mode, but
> I'm  unable to get any response from the modem during a pass, if I switch
> to normal mode (out of sat mode) the tnc comes to life, but of course is
> unable to uplink, being on the same frequency as the downlink on main
band.
>   I'm obviously overlooking  something, but I can't for the life of me
work
> what it is, the situation is not helped by that joke, Icom call an
> operators manual.
>                    Any help would be most gratefully received
>
>                      Regards Russ VK2BJP
>
>
>
>
>
> ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT member? Join now to support the amateur satellite program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org