[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: ECHO Telemetry acquisition?



Gunther,

As an interim solution, MixW with the companion comm port loopback emulator
will demodulate and route the data to TlmEcho.  I have MixW setup to output
data to comm4 and EchoTlm listens on comm3.  I just wish Wisp would work
with the same setup.

Lee-KU4OS

----- Original Message ----- 
From: "Gunther Meisse" <gmouse@neo.rr.com>
To: <amsat-bb@AMSAT.Org>
Sent: Monday, June 28, 2004 16:48 PM
Subject: [amsat-bb] ECHO Telemetry acquisition?


> I hope this is not redundant. If so please re-direct me.
>
> As an old AO-40 Telemetry gatherer I wish to add ECHO to my regular auto
> telemetry gathering.
>
> So,
> Given the specs on the UHF ECHO transmitter: Data rate - up to 57.6 kbps,
I
> am looking for appropriate current production hardware to allow
acquisition
> of this data stream at any speed up to the full 57.6kbps.
>
> I assume the Icom 910H will suffice as a front end for the appropriate
demod
> and the new software "TlmECHO".
>
> Anyone with a handle on this issue is encouraged to please speak up...
>
> GO ECHO... LET THE SHOW BEGIN!!
>
> Regards,
> Gunther Meisse
> W8GSM
> AMSAT LM: 594
>
>
>
>
> ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT member? Join now to support the amateur satellite program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home