Re: [amsat-bb] Re: MO-46 Status

["John B. Stephensen" <kd6ozh@xxxxxxxxxxx>]

The only COTS solution that I know of is to use one of the DC-3GHz scanner
receivers and a Symek TNC3 modem.

I'm still working on a wideband DSP radio that can be programmed to demodulate
38.4 and 76.8 KBPS FSK downlinks. The final PCBs have been ordered and I should
have working hardware in about two months.

73,

John
KD6OZH

----- Original Message -----
From: "John Mock" <kd6pag@qsl.net>
To: <amsat-bb@AMSAT.Org>
Sent: Wednesday, 23 June, 2004 18:41 UTC
Subject: [amsat-bb] Re: MO-46 Status


> I used to hear MO-46 fairly routinely, but none of my radios have a wide
> enough IF to decode it.  I've discussed adapting an off-the-shelf receiver
> chip to possibly receive 38.4kb packet, but he's been too busy to pursue
> any of the intermediate steps.  Normally, it has a fairly strong signal
> which is comparatively wide band. I have listen for it more than several
> times in the past month and not heard anything.
>
>          -- KD6PAG  (Networking Old-Timer, Satellite QRPer)
>
>
> [Note: I never send unsolicited binary attachments and if you receive anything
> purportedly from <kd6pag@qsl.net> that isn't signed with my callsign, then it
> probably isn't from me.]
> ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT member? Join now to support the amateur satellite program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org