[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Need sourc for replacement U-bolts for Yeasu G-500 el rotor...



Freeman,

    A couple of thoughts, take them for what they are worth.  I've had great
luck with muffler clamps from the auto parts store, especially if I put some
of that "no slip tape" on the boom where the U-bolt/muffler clamp attaches.
I'm talking about the sand paper tape they make to put on stairs that get
slippery.  The Yaesu U-bolts are surprisingly small gage.  They fit clear
down in the grooves on the back of the rotor tabs.  I'm sure Yaesu would be
happy to sell you some.  I believe the ones sold for the 550 EL rotor would
be an exact match.

73 and Good Luck,
Joe


----- Original Message ----- 
From: "Freeman P. Pascal IV" <pascal@pascal.org>
To: "amsat-bb" <amsat-bb@AMSAT.Org>
Sent: Saturday, May 22, 2004 4:13 PM
Subject: [amsat-bb] Need sourc for replacement U-bolts for Yeasu G-500 el
rotor...


> Does anyone know where I could pickup a set of U-bolts for the G-500
> elevation rotor.  Mine came without the U-bolts for securing the boom.
>
> Push come to shove, I guess I could get some threaded rod and
> manufacture my own.
>
> -Freeman, N5FPP
>
>
> ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT member? Join now to support the amateur satellite program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home