[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: R: Single Feed crossed Dipole



More specifically, by cutting one dipole to have a reactance of +jX at the 
desired frequency, and the other -jX at the same frequency.


At 18:18 2004-02-17, Cliff Buttschardt wrote:
>Bob, you get the phasing by altering the resonant frequency of the dipole.  It
>is far easier than trying to cut phasing lines to do the same job!!! Cliff 
>K7RR
>
>Robert Bruninga wrote:
> >
> > About the single feed turnstyle:
> >
> > >>> "i8cvs" said:
> >
> > Read the RSGB VHF/UHF Manual fourth edition
> > Chapter 8.44 and 8.45 figg-113 and 114
> >
> > Perfect!  Thanks...
> > but it doesnt tell how to compute the length to
> > get the needed 45 degree phasing differences..
> >
> > still looking...
> > hummh...
> >
> > Bob
> > ----
> > Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> > Not an AMSAT member? Join now to support the amateur satellite program!
> > To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
>----
>Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
>Not an AMSAT member? Join now to support the amateur satellite program!
>To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

Scott Townley NX7U
Gilbert, AZ  DM43di
http://members.cox.net/nx7u 

----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home