[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Yaesu G-600X azimuth Roptor maintenance



Mark your case halves so you can line it up exactly when you reassemble it -
trust me on this one.

73's

Don Woodward
KD4APP
AMSAT 33535
http://kd4app.webhop.org


----- Original Message ----- 
From: "Nicolaus Sallay" <n.sallay@horizon.com.br>
To: <amsat-bb@AMSAT.Org>
Sent: Tuesday, February 17, 2004 17:38
Subject: [amsat-bb] Yaesu G-600X azimuth Roptor maintenance


Hello all,

- Please I need some help from whom already did this job.
I know there has been previous postings about this matter, but due to
computer exchange I lost this information.If there is any site available
with
big pictures, I will apreciate the information.

I inted to disassemble the azimuth rotor to clean up and regrease the
unit.In
loocking to the exploded parts drawing, I understand that by losening the
"Housing Ring" with the lower bearing section, I can take apart the "Upper
Housing" with out disturbing the central motor and gear assembly and only
exposing the upper bearing.
Please, is that correct.

Second question, in the upper housing is contained the "Internal Ring Gear".
Is this gear fixed by srews or is it only engaged by some fixure, in other
words,
do you have to pay attention not to "lose his exact position" due to any
limit
swiching device.

Thank you very much in advance for any information
73
Nicolaus Sallay-PP8DA
n.sallay@horizon.com.br
Verificado c/Norton Antivirus 2003

----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org


----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home