[amsat-bb] Re: Radio setup for Sapphire

[Bob Bruninga <bruninga@xxxxxxxx>]

On Thu, 15 Jan 2004, Frank - KG6JVE wrote:

> Just to claify, the TNC speed up/down is 1200 baud?. This speed worked for
> me this morning.

ARGH!!
Yes.  My GOOF! in the below EMail.  It should be 1200 Baud!

> On Thu, 15 Jan 2004, Bob Bruninga wrote:
>
> > TH-D7 HT and D700 mobile settings for Sapphire:
> >
> > 1) Set TNC APRS mode
> > 2) Tune to 145.945 TX on band A
> > 3) Tune to 437.105 RX on band B  (tune it down to .990 during the pass)
> > 4) Set APRS DATA BAND to TX:A and RX:B
> > 5) Set APRS SPEED to 9600 baud    <============ WRONG!  1200 baud.
> > 6) Set APRS PATH to KE6QMD
> > 7) Set Packet rate to one per minute or so
> > 8) Set Transmit to AUTO
> > 9) Add the wildcard * to your MESSAGE GROUPS
>

de WB4APR@amsat.org, Bob

PCsat WEB  page     http://www.ew.usna.edu/~bruninga/pcsat.html
ISS-APRS FAQ:       http://www.ew.usna.edu/~bruninga/iss-faq.html
CUBESAT Designs     http://www.ew.usna.edu/~bruninga/cubesat.html
APRS LIVE pages     http://www.ew.usna.edu/~bruninga/aprs.html
APRS SATELLITES     http://www.ew.usna.edu/~bruninga/astars.html
MIM/Mic-E/Mic-Lite  http://ssdl.stanford.edu/mims/

----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org