[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

FT-736 to Soundcard - any hints?



A friend has a 736R and bought a device from BuxComm called a Rascal.  He 
bought the cable from BuxComm so presumably it is wired correctly (TX on 
Tip, RCV on Ring, GND on base.)

He has verified that there is modulation coming out of the interface and 
the interface also keys the radio (via the RCA jack) but when he is 
transmitting there is no modulation.  (2 metres).  My Icom 910H has a setup 
for high/low signal levels on the transceiver accessory jack, is it 
possible the FT-736R has something similar?

73,

Emily

---------------------------------
W0EEC - CM87tm
AMSAT Area Coordinator - San Francisco Bay Area
http://www.projectoscar.net    http://www.PlanetEmily.com 
http://www.experthams.net/ao7

Help Launch Echo - http://www.amsat.org/amsat/sats/echo/index.html
--------------------------------- 

----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home