[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: ISS question



yes, my 1270c transmits at 1200 baud. i use the terminal program (in win 98)
set to com1 serial port interfaced to the tnc, and plugged into a yaesu
ft2400. usually capable of transmitting through iss with 5 watts to a ringo
ranger II.

patrick...kb8rtz...

----- Original Message -----
From: "Dave Larsen PhD"
To: "Patrick Schwarz - KB8RTZ" <kb8rtz@comcast.net>
Sent: Tuesday, December 23, 2003 2:52 PM
Subject: Re: [amsat-bb] ISS question


>
>  If the 1270 will do 1200 baud then your in luck - hook it up.
> Do you have a program for it and if not you can I think use
> cmd mode [dumb terml mode] to send and Rx
>
> Dave
> N6CO
> >
>
> From: "Patrick Schwarz - KB8RTZ" <kb8rtz@comcast.net>
> Subject: Re: [amsat-bb] ISS question
>
> my only experience is using an mfj 1270c.
>
> patrick...kb8rtz...happy holidays
>
> > What is a good TNC for the ISS  I hear it now and have a regular packet
> tnc
> > but not sure if that would work with the ISS   Merry Xmas to all and to
> all
> > a good year
> >
> > Scott K9SM

----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home