Re: [amsat-bb] How to stream AO-40 telemetry to Goddard?

["Mario, I0NAA" <mani3000@xxxxxxxxxxxxx>]

Good info Chris !
Procedure is Ok and I am right now seeing blocks !

73 de I0NAA, Mario, Assisi, Italy

----- Original Message ----- 
From: "Chris Hill" <chris.hill@crhtelnet.com.au>
To: <amsat-bb@AMSAT.Org>
Sent: Thursday, December 11, 2003 1:40 PM
Subject: RE: [amsat-bb] How to stream AO-40 telemetry to Goddard?


> Hi All,
>
> Thanks to Gunther, W8GSM, I now have a copy of UDPTelem.exe, and am
> currently streaming AO-40 telemetry to Goddard.
>
> If you want to see the telemetry as it arrives, then:
>
> 1.  Obtain a copy of Stacey Mill's P3T program (v2.08) from
> http://www.keplerian.com/
>
> 2.  Once you have started P3T, select the "Menu | Internet" screen.
>
> 3.  Click on "Client (data in)"
>
> 4.  Enter "128.183.143.104" in the "Host TCP/IP Address:" field.
>
> 5.  Leave the "Port:" field at the default of 1024
>
> 6.  Press the "Connect" button.  You should see a message at the bottom of
> the window similar to "Connect to: garc9.gsfc.nasa.gov"
>
> 7.  From the main P3T window, select the "Status" option;  you should now
> see values update in near real-time as each block comes in via the Goddard
> telemetry server.
>
>
> Have fun!
>
>
>
> 73 Chris vk6kch
>
>
> ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT member? Join now to support the amateur satellite program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org


----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org