Re: [amsat-bb] AO-40 help

["Don Woodward" <dbwoodw@xxxxxxxxxx>]

Rick:

Download the Uni_Trac 2003 Help and Getting Started Guide" at
http://www.etelectronics.com/uni_trac_2003.htm - there's a nice write up on
page 35/36 that Dave did about tuning AO-40.  You can download Uni_Trac 2003
software there also - it's an upgrade from Uni_Trac 2000 and has more
frequency adjustment capabilities than UT 2000 in addition to other new
enhancements.

73's

Don Woodward
KD4APP
AMSAT 33535
http://kd4app.webhop.org

----- Original Message ----- 
From: "Rick" <richardw@mho.com>
To: "AMSAT-bb" <amsat-bb@AMSAT.Org>
Sent: Tuesday, November 11, 2003 18:50
Subject: [amsat-bb] AO-40 help


Wanted to say thanks to the many responses I have had concerning receiving
AO-40.    Last night I was able to hear the beacon load and clean; plus
several QSO's.    Also was able to transmit up and find my self; although
not near where Unitrack 2000 said I would be.

The next problem is to figure out how to put "manual corrections" in the
Unitrack program so the frequencies are close.   Although last night I
didn't really see the need for computer tuning; the Doppler shift was not
that bad.  Or not near as much as it was when I was using WISP on the
PACSATs and computer tuning was just about a "must".

If anybody out their is using Unitrac for radio tuning, I would appreciate
hearing from you on what "changes" you had to make in the satellite config
file.   I know the down converter local osc can be off and that has to be
corrected for.  Just not sure how that interacts with the AO-40 "full
Doppler tuning chart" chart that shows an entry of 2836.990 (and I don't
know if that is the "correct conversion" to use right now.

Thanks

Dick  K8ZTT


----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org


----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org