Re: [amsat-bb] Date: Fri, 24 Oct 2003 13:05:56 EST

["Jeff Griffin" <jeff.griffin@xxxxxxxxxxx>]

 See my recent posts/questions subject =  Icom 910 w/WiSP  about the odd
behavior of the data port on the 910. A few suggest it is broke, I tend to
agree. I played with an 821 quite awhile ago on the pacsats and the single
data socket worked FB with both bands. I gave up with the 910 as I already
have an 847 wired up for the pacsats, and my main plan for the 910 is for
portable AO40 use.....

73 Jeff kb2m

.
----- Original Message ----- 
From: <richardw@mho.com>
To: <amsat-bb@AMSAT.Org>
Sent: Friday, October 24, 2003 3:06 PM
Subject: [amsat-bb] Date: Fri, 24 Oct 2003 13:05:56 EST


> I have a DSP2232 and a IC910H and am wonder if anybody has
> "successfully" integrated the two.  I.E.  What interconnections are you
> using.   Then IC910 is confusing in the SAT mode in that it transmits on
> the sub band (theoretically); but, according to the manual, it still
> uses the sub band receiver in Sat mode????
>
> The "big question" is which "data socket" do you use for input?  Sub or
> Main?  And since the DSP2232 has two ports ( using port 1, mode 13 for
> BPSK (AO-16) and port 2, mode 28 for 9600b K9NG/G3RUH birds.  Do you
> connect the 1200b data out from port 1 to pin 4 of the acc socket?
> Assume the 9600b from port 2 goes to pin 1 of either the sub or main
> data sockets.
>
> Any help would be appreciated
>
> Thanks
>
> Dick
> K8ZTT
>
> ---------------------------------------------
> This message was sent using MHO WebMail.
> http://www.mho.net
>
>
> ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT member? Join now to support the amateur satellite program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org