[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: IC-910H preamp power via coax cable?




But do not do it with a UEK-3000 that draws too much power and will burn 
out the radio's relay. I use the 736 and have a 910H too but use a separate 
power supply to feed power up the coax for the downconverter.

W4SCO

At 12:46 PM 10/21/2003, you wrote:
>Hello Wayne,
>
>Tuesday, October 21, 2003, 3:39:44 PM, you wrote:
>
> > Is the IC-910H transceiver is capable of powering a downconverter via 
> the coax cable?
>
>yes it is. I have this radio and I'm using it this way. It must be activated
>using the setup for each band separately.
>
>73,
>  Reinhard
>  DJ1KM
>
>----
>Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
>Not an AMSAT member? Join now to support the amateur satellite program!
>To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home