[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

RE: mixw



Don Woodward and I are having a discussion off-board about it.  I was 
thinking PCSat, not PACSAT.  I think the consensus is that MixW did OK for 
the PACSAT Downlink but not uplink.

73,

Emily



At 01:22 PM 9/28/2003 -0800, you wrote:
>At 08:21 PM 9/28/2003 +0100, Howard Long wrote:
> >Emily said:
> >
> >> The one really great feature is that it will emulate a TNC even to
> >> the point of providing a emulated serial port for other programs like
> >> UI-View32 to use.
> >
> >That's right: Don KD4APP and I even got it operating with Wisp on UO-22.
> >http://www.g6lvb.com/Articles/MixWWisp.htm.
> >
> >I never got MIXW to run the uplink to the 1200bps PACSATs, although it will
> >handle the downlink.
> >
> >Check out Douglas KA2UPW's page http://members.aol.com/dquagliana/upw for
> >uplink software for the 1200bps PACSATs for UI digipeating for APRS.
> >
> >73 Howard G6LVB
>
>Hmm!  I was not paying too much attention to this thread until now.
>
>I obtained an old IC-2AT that has a bad xmtr to use to listen on PCSAT but
>need a TNC to use it for an IGate.  Will Mixw work and what sw would I
>need?  I assume for IG operation I merely need to monitor 145.850 MHz.  The
>computer I am thinking of dedicating is an old P90 IBM Thinkpad laptop
>(that is if I can find an ethernet card that will I/F it).  Getting DSL
>setup here.
>
>73, Ed - AL7EB
>
>
>----
>Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
>Not an AMSAT member? Join now to support the amateur satellite program!
>To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home