[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

R: type N Male chassis connectors



Hi Nick K1UXB,

If you build the S band reflector by copper or brass instead of aluminum
than you can solder directly to it the outer copper tubing of a 1/2 "
Cellflex or Heliax coax cable reducing all losses introduced by many
connectors and also by possible water and umidity.

At the other end of the 1/2" Cellflex coax cable you must fit  only one
connector i.e. a good quality male or female N connector for Cellflex 1/2"
depending on your needs.

73" de

i8CVS Domenico




----- Original Message -----
From: Nick Adiletto <K1UXBMA@comcast.net>
To: Amsat-BB <amsat-bb@AMSAT.Org>
Sent: Thursday, September 25, 2003 10:33 PM
Subject: [amsat-bb] type N Male chassis connectors


> Hi;
> I'm in the process of making a W0LMD L/S Patch to be attached to a
Parabolic
> dc,but I'm unable to locate any N male/female chassis connectors (long
> pattern) not the short ones. Wondered if anyone run into this problem and
how
> you got around it without inducing any loss. Thanks for any help.
>
> 73
> Nick K1uxb
>
> ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT member? Join now to support the amateur satellite program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
>




----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home