[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: G5400



Great idea. Saves reworking the AZ rotor.

N4EWG@aol.com wrote:

> JOE TAKE YOUR L SHAPED BRACKET TO ANY AUTOMOTIVE MACHINE SHOP or
> WELDING SHOP. HAVE THEM WELD A SHORT 1 1/2 in TRIANGLE IN EACH CORNER
> OF THE L BRACKET. THIS WILL MAKE IT STIFF ENOUGH and IT WILL NOT BEND
> OR BREAK. I HAVE ALSO MADE THIS BRACKET OUT OF 3/16 STEEL aND PUT
> TRIANGLES IN THE TWO CORNERS THIS MAKES A VERY STIFF UNIT. MY CROSS
> BAR IS 10 FT LONG MOUNTING 2ea 2Mhz BEAMS 2ea 440 BEAMS AND A BASKET
> SO AS YOU CAN SEE THIS IS A HEAVY INSTALLATION AND I HAVE OPERATED IT
> FOR OVER 8 YEARS.
>
> GOOD LUCK
> KELLY

--
Joe Leikhim K4SAT


"Jazz is not dead.  It just smells funny." -F.Z.


----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home