[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]
Re: FT-726
- Subject: Re: [amsat-bb] FT-726
- From: "Don Woodward" <dbwoodw@xxxxxxxxxx>
- Date: Fri, 2 May 2003 21:03:44 -0400
There are two different UHF modules, IIRC one is 430-440mhz and the other
is 440-450mhz
Also, the satellite board for full-duplex was an option.
73's
Don Woodward
KD4APP
AMSAT 33535
kd4app@amsat.org
http://kd4app.webhop.org
----- Original Message -----
From: "n7tcf" <n7tcf@cox.net>
To: "Andrew Glasbrenner" <glasbrenner@mindspring.com>; "amsat-bb"
<amsat-bb@AMSAT.Org>
Sent: Friday, May 02, 2003 19:45
Subject: RE: [amsat-bb] FT-726
HF, 6m, 2m all have UHF connectors, 70cm has an N. Otherwise you have to
turn it on, or look inside.
Jim Sullivan N7TCF
-----Original Message-----
From: owner-AMSAT-BB@AMSAT.Org [mailto:owner-AMSAT-BB@AMSAT.Org]On
Behalf Of Andrew Glasbrenner
Sent: Wednesday, April 30, 2003 06:03
To: amsat-bb
Subject: [amsat-bb] FT-726
Can anyone tell me how to tell what modules are in a yaesu 726 from looking
at a picture of the back panel? Is this possible?
73, Drew KO4MA
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
AMSAT Home