[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: PK232MBX Connection HELP



Etienne,

I have not used my PK232MBX for about 5 years, but
I have the full manual for it.

Are you talking about the cable that runs from "radio 1" or "radio 2" in the
rear of the unit to your transceiver??

As for the RS-232 cable, they make 25 to 9 pin adapters that a pretty
common. If you can't get one, I will do the research here.

Just ask, I'll be happy to help.

73,
Mike
K9QHO

----- Original Message -----
From: <zs6y@metroweb.co.za>
To: <amsat-bb@AMSAT.Org>
Sent: Thursday, March 20, 2003 10:49 AM
Subject: [amsat-bb] PK232MBX Connection HELP


> Hello All,
> Want to get an old fashioned RTTY signal onto AO40.
> Dusted off my old trusty PK232..Lost the wireup manual.
> If you can help with the PTT connections from the 232 to
> my TS2000x Kenwood .As well as the 25/9pin wire pinouts.
> My old cable was 25/25 pin.
> Also if there is a web page with all this info.
> Thanks a lot..
> 73's Etienne ZS6Y
> ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT member? Join now to support the amateur satellite program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home