[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

RE: DSP Noise Reduction on Receive

> -----Original Message-----
> From: owner-AMSAT-BB@AMSAT.Org [mailto:owner-AMSAT-BB@AMSAT.Org]On
> Behalf Of Jon Ogden
> Sent: Sunday, February 09, 2003 11:12 PM
> To: amsat-bb@AMSAT.Org
> Subject: [amsat-bb] DSP Noise Reduction on Receive
> Hi gang,
> I decided to try an experiment this afternoon and see how
> well my Timewave
> DSP-599zx works for improving the audio SNR on AO-40 signals.
>  Here's what I
> found out:
> For the beacon, the Timewave is not very useful.  It appears that the
> Timewave filter response has a suck-out right around 1000 Hz.
>  I'm not sure
> why, but no matter how you tweak either the High Pass or Low Pass
> adjustments, it doesn't take that out.  From what I can tell,
> it looks like
> that part of the audio spectrum is needed to properly decode
> the beacon.

You have something set wrong.  My DSP-599zx is just wonderful on the beacon.
Perhaps you have the notch engaged or something?

Mike.  KD9KC
El Paso, TX

Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org