[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: AO-40 and the ZRO



This would be great to have on a regular basis, I'm thinking. It would allow
anyone to fairly accurately measure their system performance and provide
this capability on a known schedule.

I think it is hard to realize what you are missing if you don't really know
for sure if it is out there. When people say they are hearing "everything"
they are correct from their perspective.

However it really means "everything above MY noise floor". If you can't hear
it you don't know it's there. Each persons noise floor is different. It's
not like HF where everyone is "20 over" and into the non-linear portions of
the S meter.

With the ZRO testing you will know it is there. You will also find out how
poorly you hear...

----- Original Message -----
From: "Steve" <ssbrockw@swbell.net>
To: <amsat-bb@AMSAT.Org>
Sent: Tuesday, February 04, 2003 11:30 PM
Subject: [amsat-bb] AO-40 and the ZRO


> Are there any plans to get the simulated ZRO test back on RUDAK?
>
> I have made some changes in my system and would like to be able to have a
> signal to measure against. I know where I was before I made the changes
and
> would like to see if I really did make the improvements that I think I
did.
>
> 73,
> Steve
> KA5YFC
>
> ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT member? Join now to support the amateur satellite program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
>

----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home