RE: [amsat-bb] Suggestions for 2.4 jumper

["JC Smith" <jc-smith@xxxxxxxxx>]

LMR 400 with carefully installed crimp-on N connectors.  Clamp-on connectors
should be just as good.  Avoid the two piece, solder-on connectors.
Waterproof the connections even though good N connectors are fairly
watertight by themselves.

-----Original Message-----
From: owner-AMSAT-BB@AMSAT.Org [mailto:owner-AMSAT-BB@AMSAT.Org]On
Behalf Of Jeff Kelly
Sent: Wednesday, January 22, 2003 1:19 PM
To: amsat-bb@AMSAT.Org
Subject: [amsat-bb] Suggestions for 2.4 jumper


I will need a short N male to N male run from the 2.4 preamp
to the Drake 2880.  Maybe a foot possibly more to the rear
of the dish.

What is everyone using for cable at this freq?

thanks,

Jeff
KT2K


----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org