re:[amsat-bb] Fiber Optics at RF

[Bob Bruninga <bruninga@xxxxxxxx>]

GOod info!
Thanks
Bob

On Mon, 21 Oct 2002, Joe Leikhim wrote:

> Bob; They are amplitude modulated devices, so be sure you have the
> minimum length of fiber (or equivalent attenuation) or you might not
> detect anything due to saturation of the detector.
>
> Joe
>
> Message: 2
> Date: Mon, 21 Oct 2002 08:48:51 -0400 (EDT)
> From: Bob Bruninga <bruninga@usna.edu>
> Subject: [amsat-bb] Fiber Optics at RF
>
> Does anyone have any experience with Fiber Optics in linear applications
>
> up to 2 GHz?
>
> We just got some F/O TX/RX's that are supposed to provide 0 dBm to 0 dBm
>
> end to end over the frequency range of 10 to 2200 MHz.  But when
> installed over our existing Fibers, they dont.  MFR's tech support's
> only
> help was "are they plugged in"  Are they turned on?.  Should work.
>
> Bob
>
>
>
> --
> Joe Leikhim K4SAT
> Jleikhim@nettally.com
>
> "Jazz is not dead.  It just smells funny." -F.Z.
>
>
> ----
> Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
>

de WB4APR@amsat.org, Bob

PCsat WEB  page     http://www.ew.usna.edu/~bruninga/pcsat.html
ISS-APRS FAQ:       http://www.ew.usna.edu/~bruninga/iss-faq.html
CUBESAT Designs     http://www.ew.usna.edu/~bruninga/cubesat.html
APRS LIVE pages     http://www.ew.usna.edu/~bruninga/aprs.html
APRS SATELLITES     http://www.ew.usna.edu/~bruninga/astars.html
MIM/Mic-E/Mic-Lite  http://www.toad.net/~wclement/bruninga/mic-lite.html

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org