[amsat-bb] DSP-12 and FSK setting

[Vincenzo Mone <ik8ozv@xxxxxx>]

Hi to the list,
i own a tnc DSP-12.
I would like to connect it on my new Yaesu FT-920.
It needs an FSK output but i cannot set it.
I looked on the manual at the Appendix F: Internal Jumpers.
It says:

2) Locate the 3-pin jumper strip on the DSP board next to the
    HF port radio connector. ecc ecc ecc ecc.
The problem is i have located te DSP board but near the HF
port there is only one jumper strip and it is 5 pin and not 3
pin.
I've tryed to move the jumper but nothing happens i still hear
a single tone coming out.Now i do not remember how it was
positioned originally.From when i have moved this jumper on
the computer i see only characters without sense.Sometimes
i get the menu ok.Please can somebody tell me first how to
positionate the jumper how was originally and also where is
located the strip jumper to set the FSK Output?
Any help will be apreciated.
73 de Enzo IK8OZV


          *****************************************
          ******   SMS  +393389749786  ******
          ******   GSM  +393389749786  ******
          ******   FAX   +393287244294  ******
          ******    ICQ No     30666121    ******
          ****     2nd e-mail: vimone@tin.it ****
          *****************************************

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org