Re: [amsat-bb] Ao40 telemetry

["Lee" <lee-fl@xxxxxxxxxx>]

Vince,

Most likely you have "Display E-blocks" checked under Data Display Filters
on the Output Settings menu.  The E-blocks are usually old events which
triggered the data capture function onboard AO-40.  I usually leave it
unchecked except when I want to see the data in a new event.  If you check
the "Require Good CRC" option then you won't have to worry about being
confused by displaying invalid data blocks.

Lee-KU4OS

----- Original Message -----
From: "Vince Fiscus, KB7ADL" <vlfiscus@mcn.net>
To: <amsat-bb@AMSAT.Org>
Sent: Wednesday, October 02, 2002 22:07 PM
Subject: [amsat-bb] Ao40 telemetry


> Just playing with AO40Rcv.  I was looking at the IF Matrix tab.  On one
> block it had a number of inputs connected to S2 and then on the next
block,
> it didn't have any except the MB. Was I looking at an old re-transmitted
> data block, or were things really switching back & forth?  Phase is now 32
> -  02:04 UTC. According to the schedule a passband shouldn't be on.
>
> Vince
>
>
> ----
> Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org