[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]
Re: 5400 use
- Subject: [amsat-bb] Re: 5400 use
- From: "Vince Fiscus, KB7ADL" <vlfiscus@xxxxxxx>
- Date: Tue, 24 Sep 2002 12:19:22 -0600
- In-Reply-To: <200209241042_MC3-1-1219-A5FF@compuserve.com>
I use the SASI Sat tracker for about 8 years, and all I have are Notebook
computers. SASI uses the computer parallel port. You can see one at
www.nlsa.com
73 de KB7ADL
At 10:42 AM 9/24/02 -0400, "Eugene H. Marks" <WB2LLP@compuserve.com> wrote:
>Vince,
>
>I saw your question on the AMSAT b-board and that generated this note. I
>have a 5400 and a laptop, but do not know how to connect the two. A letter
>to Yaesu provided the missing documentation on the controller DIN plug,
>but it still leaves a blank spot. It would seem that I need some more
>circuitry at the computer interface to convert the alt/az position
>information at a minimum. I would appreciate it if you could tell me
>what I am missing or point me to a source.
>
>I saw a demo of one of these rotators and it was very impressive, but I was
>too far back to see all the parts. I know that if I want to continue to
>use FODTRACK, I need to build a controller, but the demo was running
>InstanTrack and I did not see any significant hardware between the laptop
>and the 5400 controller.
>
>TNX es 73 de WB2LLP aka Gene Marks
----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
AMSAT Home