[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]
Re: 60cm Dish with Patch vs 3ft dish with offset helix feed
- Subject: Re: [amsat-bb] 60cm Dish with Patch vs 3ft dish with offset helix feed
- From: "Bob Nave - WB9CNS" <patcher@xxxxxxxxxxx>
- Date: Sun, 18 Aug 2002 13:49:49 -0500
Hi Mike and the amsat-bb group
Using the G3RUH 60 cm dish with the patch feed and a UEK3000
Converter. Usally see the Beacon 4 S-Units above the noise on the
average. Right now around MA-170 am seeing around 6 S-units
above the noise. Oh Yes, There is no Desence.
73's Bob - WB9CNS
----- Original Message -----
From: <ASTROHAM47@aol.com>
To: <amsat-bb@AMSAT.Org>
Sent: Sunday, August 18, 2002 11:42 AM
Subject: [amsat-bb] 60cm Dish with Patch vs 3ft dish with offset helix feed
> Anyone using the G3RUH 60cm dish with patch feed?? At what signal
strength
> are you receiving the AO40 beacon say on average...at say MA 100 and say
> pointing angle of 20 degrees?? I am using 3 ft dish with helix feed...am
> finding out helix feed is prone to desense..problems...I think the bigger
th
> helix be bigger the problem...(I guess from side lobes..of 70cm
antenna...)
>
> Mike Miller KA5SMA
> ----
> Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
>
----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
AMSAT Home