[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Build your own AO40 Uplink antenna



Hi,

the correct link is: www.qsl.net/dk7zb

The long Yagis (> 10 elements) are optimized for the DX-window 432 MHz.
By linear abridgement you will get the dimensions for 435 MHz.
Had very good results with the 14el-Yagi but you have to adjust the
feedpoint impedance with the position of the 1st director!

vy73
             Gerald, DL1RG


At 10:56 11.08.02 +0200, you wrote:
>Try this link.
>www.qsl.net/dk2zb
>I have tried the 10 element version.
>Can hear my downlink with 20watts output
>at 35k KM's..
>1.5 meter dish 2.5 turn feed..Squint 48 Deg..
>Data to RHCP them go to OZ2OE.
>Hope you find this of help..
>Also the dimensions are in mm..
>73's Etienne
>
>----
>Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
>To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home