Re: [amsat-bb] SASI Frequency Manager

["Don Woodward" <dbwoodw@xxxxxxxxxx>]

On the NLSA site the SASI they sell is a parallel port unit that controls a
G5400 rotor. Sounds like you have something else perhaps from the same vendor.

You might try to contact the manufacturer via the info they have listed:

Systems and Software International (SASI)
4639 Timber Ridge Drive
Dumfries, VA 22026-1059
tel (703) 680-3559
FAX (703) 878-1460
e-mail whill@sasiltd.com
73's

Don Woodward
KD4APP
AMSAT 33535
kd4app@amsat.org
http://kd4app.webhop.org

----- Original Message -----
From: "Bill Greene VE7WFG" <bgreene@telus.net>
To: <amsat-bb@AMSAT.Org>
Sent: Monday, August 05, 2002 11:59
Subject: [amsat-bb] SASI Frequency Manager


Hello All,

Does anyone have a schematic for the Serial Port SASI "Frequency
Manager" unit.

What I am interested in is the pins on the board itself and what they
do. I have one here with no cord on it and I was hoping to wire it with
two connectors through a switch so it could control either an Icom 820
or a Yaesu FT-736R. Possibly it is an either or situation but I would be
interested in looking at it anyway.

I can't seem to find anything on the net just a link to the Nova site.
Any help would be appreciated .

Thanks in advance for all responses.

73 de VE7WFG

Bill


----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org