Re: [amsat-bb] WlogTracker & IF100 ROTOR INTERFACE

["Franco Borsa" <hb9oab@xxxxxxxxx>]

> may I advise you that IF100 AMSAT ROTOR INTERFACE is no longer
> available since 2 years. In the English speaking world I doubt that
> there are any users except possibly 2 or 3. The interface was only
> very popular in German speaking countries. I know what I am speaking
> from because I managed the AMSAT-DL Warenvertrieb in the past.
> Reinhard
> DJ1KM

WLOGTRACKER FREEWARE at www.wlog2000.com

Hello Reinhard,
thanks for the information that already I doubted but at the moment the
choice of the IF100 me is "obliged" in how much is the TRACKER_INTERFACE
that use for my system of auto tracking antennas.
In my program of LOGBOOK [ Wlog2000 ] that then I hope to dawn also with the
WLOGTRACKER I have already implemented all the models of rotor of greater
use:
- IF100
- SARTEK
- ARSWIN
- BIGBOY
- HAM
- PROSYSTEL
- DCU01
- ROTOR EZ
- & a DDE port for other...
But in WLOG200 at moment only for "CALLSIGN / DXCLUSTER AZ_TRACK"

For these tests, sure I will be able to then estimate with my IF100 the
optimal operation of WLOGTRACKER in order in the case if demanded, to
implement it in WLOG2000 with other already ready sources.
Optimal however to have immediate vision in WLOGTracker all the satellites
and to be able therefore to verify the operation less or with a double_click
(RADIO_CAT/AZ+EL) to verify the operationality of the sat in the fastest
way.

ps: wath is actual AMSAT TRACKER available and possible "AZ/EL mode"... if
not on the list?
[sry bad english]
73's
Franco
hb9oab@amsat.org
Home: www.wlog2000.com/hb9oab


----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org