[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: South centered G5400???



You will have to replace the AZ meter scale so it reads from 0-360 instead
of 180-0-180.  Then loosen the rotor mast clamp, turn the rotator 180
degrees and tighten the clamp so the rotor stop is at north.  Lastly,
recalibrate the rotor.

Doug Faunt N6TQS +1-510-655-8604 wrote:
> 
> Is there a reasonably easy way to change the azimuth readout on a
> stock G5400 control box to account for a south-centered setup?
> 
> Apparently Uni_Trac will support that, but I wouldn't mind having the
> meter indicate the true direction.
> 
> 73, doug
> 
> ----
> Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

-- 
73, Roy -- W0SL

E-Mail: rdwelch@swbell.net
Home Page: http://home.swbell.net/rdwelch
----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home