[amsat-bb] EZNEC model

[Bob Bruninga <bruninga@xxxxxxxx>]

EZNEC Experts:

I'm trying to model a 1/4 wave monopole on the corner of a 1.5 wave length
cube.  But to get the wire grid down to less than 0.1 wavelength spacing,
I run out of lines and/or segments.  Or end up with only one segment per
line which I thought is bad.

In otherwords, what are the rules of thumb about making large groundplane
surfaces...  Any advice is appreciated.  This is the GPS antenna on PCsat.

de WB4APR@amsat.org, Bob

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org