[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]
Re: RE: Sats for packet 9600 and software
- Subject: Re: RE: [amsat-bb] Sats for packet 9600 and software
- From: Mike Murphree <w4lna@xxxxxxxxxxx>
- Date: Thu, 9 May 2002 11:58:22 -0500
- In-Reply-To: <3EA55B77.1D86B8CC.00002B9C@aol.com>; from K5OE@aol.com on Thu, May 09, 2002 at 11:23:43AM -0400
- User-Agent: Mutt/1.2.5.1i
On Thu, May 09, 2002 at 11:23:43AM -0400, K5OE@aol.com wrote:
> Bill,
> I use the internal TNC on UO-22 almost daily. Receive is no problem, but you must adjust the downlink frequency (start at 435.131 MHz and go down to 435.111 MHz at end) manually since the RS-232 port is in use by the TNC. Why didn't they build this rig with two RS-232 ports?
The lack of a FM discriminator readout also complicates manual tuning.
If they made a firmware update, that would provide an indication on the
IF filter bargraph, it would be great...
Mike
----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
AMSAT Home