[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: AO-40 telemetry from Goddard INFO REQUEST



silly question :P

what is this goddard thing? :)

or who come to think of it.

Speak to you later.
Scott Elliott
Scott@pieh0.co.uk
2E1FJB / M1SJE
----- Original Message -----
From: "Gunther Meisse" <gjmouse@neo.rr.com>
To: "'Tim Zibrat'" <tzibrat@adelphia.net>
Cc: <amsat-bb@AMSAT.Org>
Sent: Wednesday, April 24, 2002 11:55 PM
Subject: RE: [amsat-bb] AO-40 telemetry from Goddard INFO REQUEST


> Tim, Thanks ... I will install after dinner. I'll feed (if all goes well)
> tomorrow. Then I will be out of town for 10 days. When I return I'll try
to
> make a habit of feeding.....
> Thanks for your help.
> 73
> Gunther Meisse
> W8GSM
>
>
> -----Original Message-----
> From: Tim Zibrat [mailto:tzibrat@adelphia.net]
> Sent: Wednesday, April 24, 2002 8:33 AM
> To: gjmouse@neo.rr.com
> Subject: RE: [amsat-bb] AO-40 telemetry from Goddard INFO REQUEST
>
>
> Gunther,
>
> I for one would be pleased if someone would start feeding Goddard
telemetry!
>
> Here's how you do it:
>
> Save the attached file somewhere on your hard drive.  Unzip and install.
> This is the program that takes the telemetry stream from AO40Rcv and
> transmits it to the Goddard server.  It's called UDPtelem.  After
> installation, run it from wherever you installed it to.  This is a simple
> program and you only have to setup a few things.
>
> The program should fill in your (Data Source) IP Address and TCP Port
(1024)
> upon starting if your system has one.  The Telemetry Server info for
Goddard
> is also filled in.  In case it isn't, the IP address is 128.183.143.104
and
> the UDP port is 2121.
>
> Now fire up AO40Rcv.
>
> In AO40Rcv, click on [Output Settings...]
> A window pops up titled "Data Output/Display Setup"
> In the bottom left there is a frame titled "Network Server Setup"
> Click the box titled "Enable Server"
> Make sure the Socket is 1024 & choose "P3T Format Data"
> Click "OK"
>
> Click on the "Connect" button on UDPtelem.  The "Connect" indicator should
> change to green if all goes well.  That's all there is to it.  You should
> see the byte count change and the indicators change as you are receiving
> "Sync", "Receiving Data" and "Sending Data".
>
> To test to make sure that you are connected to Goddard, run P3T and set it
> up as a TCP client and connect it to Goddard.  You should see when you
> receive a telemetry block in AO40Rcv, UDPtelem will send it to Goddard,
and
> P3T will receive it back from Goddard.
>
> I hope this helps!
>
> 73,
> Tim
> K3TZ
>
>
>
> > -----Original Message-----
> > From: owner-AMSAT-BB@AMSAT.Org [mailto:owner-AMSAT-BB@AMSAT.Org]On
> > Behalf Of Gunther Meisse
> > Sent: Tuesday, April 23, 2002 9:26 PM
> > To: amsat-bb@AMSAT.Org
> > Subject: RE: [amsat-bb] AO-40 telemetry from Goddard INFO REQUEST
> >
> >
> > For one, I would be happy to feed Goddard daily. When at the home QTH I
> > capture most of the US passes and send off the telm to the archive. If
> > someone would clue me in on the software and procedures to
> > concurrently feed
> > Goddard while running AO49Rcv I would be happy to feed every time I am
up.
> > 73
> > Gunther Meisse
> > W8GSM
> >
> >
> > -----Original Message-----
> > From: owner-AMSAT-BB@AMSAT.Org [mailto:owner-AMSAT-BB@AMSAT.Org]On
> > Behalf Of Lee
> > Sent: Monday, April 22, 2002 7:27 PM
> > To: amsat-bb@AMSAT.Org
> > Subject: Re: [amsat-bb] AO-40 telemetry from goddard...
> >
> >
> > I was up feeding the server for about 8 hours yesterday, 4/21.  I
> > generally
> > try to have the feed up anytime I'm getting good blocks.  I too wish
more
> > stations would get back into the habit of feeding live data to the
server.
> > It is very nice for those of us with only one receiver to be able
> > to monitor
> > things like AGCs while we are making contacts or experimenting with a
new
> > mode.
> >
> > Lee-KU4OS
> >
> > ----- Original Message -----
> > From: <T5z4@aol.com>
> > To: <ron.parise@gsfc.nasa.gov>; <amsat-bb@AMSAT.Org>
> > Sent: Monday, April 22, 2002 11:40 AM
> > Subject: Re: [amsat-bb] AO-40 telemetry from goddard...
> >
> >
> > > In a message dated 4/22/02 8:55:13 AM Eastern Daylight Time,
> > > ron.parise@gsfc.nasa.gov writes:
> > >
> > > > I just checked. It is running and I can connect to it. Nobody
sending
> > > >  data through it though.
> > > >
> > > >  Ron, wa4sir
> > > >
> > >
> > > Thanks for your reply Ron.  For many months now I have been able to
> > connect
> > > with the system but since a few months have passed where then you
> > indicated
> > > some down time was necessary due to security issues, I had hoped the
> > > inactivity in recent months might only exist for the same
> > reason.  Anyway,
> > > it's kinda disappointing that amateur interest has faded enough that
no
> > one
> > > is feeding the telemetry downlink through your system for others with
no
> > > AO-40 capability to help in the so VERY crucial need for capture and
> > archive
> > > of telemetry data.  Thanks for keeping it up and running anyway.  Who
> > knows,
> > > I may just be able to pick up the slack and provide that feed
> > through your
> > > system in the near future.
> > >
> > > 73, Steve
> > > K5PK
> > > ----
> > > Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> > > To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
> >
> > ----
> > Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> > To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
> >
> > ----
> > Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> > To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
> >
>
> ----
> Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home