[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

DEM 13LNA Preamp

I have recently constructed a DEM 13LNA preamp.  I have set up the bias as

Drain Current        15 ma

Gate Voltage        -0.29 volts

Drain Voltage        2.49 volts

I have no way to measure nf.  Does anyone have any information on how to set
up bias for optimum nf?  Also, I would be interested on measured nf for this
preamp.  Advertised nf is < 0.7 db.  However the spec sheet for the device
shows nf of about 0.3 to 0.4 db at 2 Ghz.

Your comments will be appreciated.

73 de Ken - K5GUU
Amsat LM - 1565

Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org