[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Signal line from downconverter...




  I use standard rg6 (tv coax) with the crimp-on (F?) connectors...


Chris Wilkinson wrote:
> 
> All those who have various MDS/MMDS downconverters: What type of signal-
> line/connectors did you use to make the run from the downconverter your
> preamp or the downconverter to your shack?
> 
> Months ago there was a firey discussion on this list about what was the best
> method (that with the least noise and least loss profile) to pull the signal
> from the downconverter to the next step in your receive stage. Many
> downconverters, of course, have the type-F output connector on them and it
> was theorized they were balanced for 75-ohm output. I'm curious about what
> people decided on their own and what, infact, worked for those who are
> receiving successfully.
> 
> Input and pictures are appreciated.
> Thanks and 73's
> Chris // N8DVM
> 
> ---
> Chris Wilkinson
> Support Systems Specialist
> McDonald Observatory
> 
> ----
> Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home