[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Paths through PCsat



On Fri, 2 Nov 2001 11:16:29 +1300, Sid Ireson wrote:

> PCsat users:
> In looking at a 18 hour log of PCsat for today, I think there is a
> missunderstanding of how to set the path for an APRS satellite.

> I am amazed that anything gets through this mess...

> What you don't see below is the 5 to 15 copies of EACH packet that I had
> to filter out of the file...

> ZL1***>APRS,W3ADO-1,ZL3AI-4,MARLEY-1*,WIDE3-3:HOT STUFF AT BLUFF..
> ZL2**>APU16K,W3ADO-1,ZL3AI-4,MARLEY-1*,WIDE3-3::ZL2VAL   :i dont think

I cannot speak for the rest of the digied frames, but the excess after
W3ADO-1 are all added by the ZL3AI-4 digipeater to route the frame
through following digi stations to where the satgate can pick them up.
Cheers, 
       Alan. (ZL2VAL)

-- Arachne V1.67, NON-COMMERCIAL copy, http://arachne.cz/

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home