Re: [amsat-bb] Kenwood TM-D700A

[Dave Kaplan <dkaplan@xxxxxxxxxxxxxx>]

I started to  download the program then noticed that it expires in two 
days. Might as well wait for the next version to download.

Dave
WB0WNX

At 05:59 PM 10/29/01, you wrote:
>Hi Jerry,
>
>I use LINK700 written by WA3HRL, very good soft
>easy to use...
>
>go to: www.wa3hrl.com/link700
>
>Good luck, Best 73
>ON1CAU, BERTO
>
>ON1CAU satellite page
>http://users.skynet.be/on1cau/
>
>----- Original Message -----
>From: "jrocky" <jrocky@mediaone.net>
>To: "AMSAT-BB" <amsat-bb@AMSAT.Org>
>Sent: Monday, October 29, 2001 11:06 PM
>Subject: [amsat-bb] Kenwood TM-D700A
>
>
> > Hello,
> >
> > Purchased a new Kenwood TM-D700A over the weekend.  Have the software
> > from Kenwood to program the memories and APRS info.  Screen on the D700A
> > shows the messages from PCSAT and ISS so far.  Is there a program to
> > transfer the messages to the computer?  In the instruction manual is
> > says one can use a terminal program for the internal TNC, but I have not
> > been able to set the "plain" TNC mode yet.
> >
> > Bad intermod here on the 437.100 SAPPHIRE downlink, unable to copy :(
> >
> > 73, Jerry
> >
> > ----

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org