[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Kenwood TM-D700A



Hi Jerry,

I use LINK700 written by WA3HRL, very good soft
easy to use...

go to: www.wa3hrl.com/link700

Good luck, Best 73
ON1CAU, BERTO

ON1CAU satellite page
http://users.skynet.be/on1cau/

----- Original Message ----- 
From: "jrocky" <jrocky@mediaone.net>
To: "AMSAT-BB" <amsat-bb@AMSAT.Org>
Sent: Monday, October 29, 2001 11:06 PM
Subject: [amsat-bb] Kenwood TM-D700A


> Hello,
> 
> Purchased a new Kenwood TM-D700A over the weekend.  Have the software
> from Kenwood to program the memories and APRS info.  Screen on the D700A
> shows the messages from PCSAT and ISS so far.  Is there a program to
> transfer the messages to the computer?  In the instruction manual is
> says one can use a terminal program for the internal TNC, but I have not
> been able to set the "plain" TNC mode yet.
> 
> Bad intermod here on the 437.100 SAPPHIRE downlink, unable to copy :(
> 
> 73, Jerry
> 
> ----
> Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
> 

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home